Straight Rear Latex Squeegee Blade for the CleanFreak® Performer 20 & 24 Auto Scrubbers

Product Description

This rear squeegee blade fits the CleanFreakandautomatic floor scrubbers. It is a replacement blade that fits perfectly onto the squeegee assembly on the rear of both CleanFreak auto scrubbers. For a completely new squeegee assembly, you have to order a newalong with this rear blade. This will allow you to start recovering solution like the machine is new again.Make sure to use ain your recovery tank to preserve vacuum motor life.

These squeegee blades (front & rear) can be replaced and rotated without any tools. We recommend wiping both blades after each use to lengthen the squeegee blade life and reduce the potential for streaking. This rear blade is directly responsible for making the floor dry to the touch after the squeegee assembly passes over it, so it should be taken care of frequently.

Each squeegee blade can be used on all 4 sides.You can use the front side of the squeegee, then rotate, so the back side is facing forward.Once those 2 sides are compromised, you can then flip it upside down, and use both of those surfaces. Squeegee change outs are easy because no tools are required to switch them out. We recommend rotating your squeegees every 20 hours of scrubbing, so they wear evenly.

*Please Note: Any rear squeegees bought for 20″ & 24″ auto scrubbers with serial numbers before 8000189164 for 20″ machines and 8000189411 for 24″ machines should purchase the MPVR45195 squeegee. You can order these older model squeegees by calling customer service at 1-888-722-5508.

Quick Overview

• Each blade can be used on all 4 sides
• Fits the CleanFreak Performer&auto scrubbers
• Easy to rotate & replace without tools
• Rear squeegee blade